Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.
Why did wind sensor canot received the data via modbus serial port.
-
now I modify the connection to rs 485 .
and I test againdisplay "argument type mismatch"
many data 32 bit float.and mango have no this option.
Attachment: download link
-
-
in wind sensor side ,have two type:rs422 or rs485,
before the connection always is rs 422, and I change a adapter to rs485 to test to see have any changing.
-
and I test serval times.
and display"Exception from modbus master:CRC mismatch:given=1536,calc=8432"
Attachment: download link
-
as your attachment, the modscan32 don't receive any value?don't you know what's mean valid slave responses:0?
-
if in mango,
What do this mean "nd I test serval times.and display"Exception from modbus master:CRC mismatch:given=1536,calc=8432"
" -
This means that you got a response but the CRC did not match so the message was discarded.
A CRC of 1536 was given but the calculated CRC was 8432. This indicated that the message might have been corrupted.
If you don't know what a CRC is then you should do some research on the Modbus spec and will probably clear that up.
Joel.
-
yes,I change to wind sensor adapter from rs 422 to rs485 adapter,and display above the message."exception from modbus master:CRC mismatch:given=1536,calc=8432"
-
How to setting can display normal value.
will not display"Exception from modbus master:CRC mismatch:given=1536,calc=8432"
BR
Attachment: download link
-
I don't think that's a question that anyone here can answer. It could be noise on your network or something else.
Joel.
