Adding Text to point values in Dashboard Designer

[hayden_AUS]

Thanks FOX, just thought I should be able to do it using the drag and drop method.

[hayden_AUS]

The "Point Value" element, there is an attribute "label", where you can choose "NAME".
I think IA could add this to the other elements such as "Binary Switch Button" to avoid
the extra step to name using code.

[CraigWeb]

Ye for the <ma-switch> you will need to add a <label> in before/after it as It shows the points rendered value after the switch.

[CraigWeb]

@hayden_aus
I actually agree I was using this element a few days ago and was running into the same problem. I think we could also add another attribute to choose to display the rendered value or not. it is not always necessary.

[hayden_AUS]

Where do you use Label?

I added label to be "NAME' like in the Point Value Element, it didn't work.

<ma-switch id="c7d1c0f3-cf43-489c-a51c-719830aba9cc" style="position: absolute; left: 0px; top: 0px;" point-xid="DP_e73a38ec-004f-447c-b527-90d7ef73c6ec" label="NAME"></ma-switch></ma-switch>

[CraigWeb]

<div class="ma-designer-root" id="2a377d42-b2ca-48dc-b763-b1ab6bf93f90" style="width: 1366px; height: 768px; position: relative;">
    <label id="4bdbe665-0230-4cc4-890f-e29e72942c9d" style="position: absolute; left: 0px; top: 12px;">my binary point:</label>
    <ma-switch id="08959504-fe1d-4fe8-b19d-5b197e7cd3b8" style="position: absolute; left: 130.438px; top: 0px;" point-xid="LGCY_OZ2_AMB_O3HIGH"></ma-switch>
</div>

Here I used the drag and drop, the <label> is in the HTML elements drop down.

[hayden_AUS]

Thanks Craig, That's what I have already been doing, except I drag from the Basic Components section.

Anyways, thanks for the help, I will wait to see if IA do a fix, or just keep doing the two elements.

[CraigWeb]

I'm sure with enough motivation the component can be changed. might help to give an exact description of what you would like.

My 2 cents is that the component should be able to have the same attribute as the <ma-point-value> to include the name or device name before the switch. As well as being able to choose to show the point value or not,

[Jared Wiltshire]

@hayden_AUS I've added the option for displaying a label to <ma-switch> I've also made it possible to display the tags. See screenshot below.

This will be released in UI module v3.6.3 which should go out today.

[hayden_AUS]

Thanks Jared, you guys are awesome!

Great response time, much appreciated.