Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.
Use of the DS2406 switch for input
-
Can the DS2406 switch be used as an input to Mango? I see I can set the output binary value. My DS2406 is found by Mango but when I close contacts in the field, the state does not change in Mango. Dallas One Wire Viewer does see the field contact closure. For example, I want to sense air flow paddle switches and current switches such as CR Magnetics CR9321.
If not, can anyone suggest another way to do this with another kind of 1-wire input device?
Thanks for your help in advance,
Mike
-
Bump
any ideas on how you can sense in a 1-wire circuit ?
Many thanks
-
The DS2406 should already be supported via the SwitchContainer. If you are finding otherwise you can ship us a sample and test it out.
-
Hi
the DS2046 does work as a switch but not as a sensor (which its also capabale)
Rather than me send you one - can I ask if you can go to
https://shop.maxim-ic.com/storefront/searchsample.do?menuitem=Sample&event=SampleSearchLoad
where you can order free samples of all of the 1-wire componets
Francis
-
What specific part number are you using? They don't seem to have much in the way of samples at the moment.
-
My bad, I was looking for a DS2046. There is a MAX2046ETJ+ available. Is this similar enough to what you are using?
-
its DS2406
-
Yes, but that's not with Maxim-IC calls it. Can you specify the exact part that you are having trouble with?
-
-
Ah. That's a "2406", not a "2046". They only provide samples for the DS2406+ and DS2406P+. Which are you using?
-
ahh - my apologies
never could typpppe propperly
DS2406+
Francis
-
Hi
any update on testing ?
-
Sadly, no. The samples that Maxim sent i cannot use. When you say it won't work as a sensor, why is that? It should be reading the device's value on each poll.
-
ok - let me have a play applying a voltage to the switch side and see what happens - I am away at the mo so this will take a few days to achieve
If any one else can have a go at this then please feel free to chip in
Francis
-
OK, I will finally get off my butt and send you one of these like I promised.
It works with One Wire Viewer just fine by connecting a switch across it's inputs. I can see the state change in One Wire Viewer.
I could really use this functionality from Mango as well.
http://www.embeddeddatasystems.com/D2--Low-Cost-2-Channel-Digital-IO-1-Wire-Card_p_12.html
Is there any import restrictions to Canada? Special markings?
Mike
-
Document it as a gift of 0 value. This will avoid the astonishing duties and taxes that would otherwise be applied.
-
Oh, but if your device doesn't have a RJ connector, don't bother. I'm not set up for integrating components on to boards or anything.
-
I've got leads soldered to the board now.
On the input side: DQ, Com, +5VDC
On the output side I/O A, com, I/O BThe DS 2406 is mounted on the board with some pullup resistors.
I can do RJ-45 on the input side if you needed it.
-
I got test 1-wire equipment from hobbyboards. If yours is compatible with that, it should be fine.
-
Bump
any news on this - did you manage to test