Help getting ma-watch-list-get points into a controller/service

BobDay

@CraigWeb - if it's helpful, happy to provide a higher level use case for the component, as it were.

BobDay

@CraigWeb @Jared-Wiltshire: Whether or not I should be using components, my problem is, clearly, in not understanding how to access watchlist points. I have read dozens of posts here, but I'm not getting it. Just asking for a little further explanation from IAS.

The ONLY way I've been successful in accessing <ma-watch-list-get> points is, per last code above, wrapping it in a $rootScope object, and accessing it through injection - even at that, I'm getting flakey async problems unless I timeout more than one seconds.

What am I doing wrong here?

Jared Wiltshire

Do not use the ng-controller attribute
Do not use module.controller()
Don't set properties on the $rootScope
Prefer .controller({opts}) instead of .directive(function() { return {opts}; })
Instead of controller: 'PushCtrl' use controller: ['$scope', function($scope) { // do something }] or (my preference):

class PushCtrl {
  static get $$ngIsClass() { return true; }
  static get $inject() { return ['$scope']; }

  constructor($scope) {
    this.$scope = $scope;
  }
}
// then
.controller: PushCtrl // no single quotes

Basically the way you are using the PushCtrl controller in ng-controller then also as the controller for the <push-lamp> directive makes no sense. And <push-lamp points="point" is never going to work as it is the wrong variable name.

Jared Wiltshire

Also use the $onChanges() hook of the controller rather than setting a timeout.

Jared Wiltshire

Basically I think it boils down to this -

<div ng-init="page = {}"></div>

<ma-watch-list-get ng-model="indicatorWl.watchlist" parameters="indicatorWl.parameters" on-points-change="page.points = $points" id="wl-indicator-id" watch-list-xid="WL_Indicator"></ma-watch-list-get>
<ma-get-point-value points="page.points"></ma-get-point-value>

<div>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OT1'}:true | maFirst"></push-lamp>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OT2'}:true | maFirst"></push-lamp>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OT3'}:true | maFirst"></push-lamp>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OMX'}:true | maFirst"></push-lamp>
</div>

User module:

module.component('pushLamp', {
      template: `<div class="indicator" ng-class="$ctrl.point.renderedValue"
        <br/>{{$ctrl.point.xid}}; {{$ctrl.point.name}}<br/>{{$ctrl.point.tags.indText}}</div>`,
      bindings: {
        point: '<'
      }
  });

BobDay

Thank you @Jared-Wiltshire. interesting. Ok I'll give it a try. Could you clarify the use of $onChanges() with the controller? would it be in this case

$onChanges($ctrl.point) {...}

?

Jared Wiltshire

@bobday

$onChanges(changes) {
  if (changes.point) {
    // point changed
  }
}

Have a read of https://docs.angularjs.org/guide/component for more details.

BobDay

aha. thanks. I also have to toggle a different binary point when this element is clicked. Do I need to use the api to do that, or is there a different way to set a point's value (which point's xid can be passed in as an attr of the <push-lamp> or calculated? ~~and, would I just include that function in the component's controller?~~ Thank you - I'm drinking 1.5 from a firehose (and Tom Motto!)

BobDay

Thanks very much - that all worked.

<div ng-init="page = {}"></div>

<ma-watch-list-get ng-model="indicatorWl.watchlist" parameters="indicatorWl.parameters" on-points-change="page.points = $points" id="wl-indicator-id" watch-list-xid="WL_Indicator"></ma-watch-list-get>
<ma-get-point-value points="page.points"></ma-get-point-value>

<div class="ma-designer-root" id="30987a71-8c32-4308-a9ae-3fdff231c44b" style="width: 1366px; height: 768px; position: relative;">

<div>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OT1'}:true | maFirst"></push-lamp>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OT2'}:true | maFirst"></push-lamp>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OT3'}:true | maFirst"></push-lamp>
    <push-lamp point="page.points | filter:{xid:'DP_ind_H2OMX'}:true | maFirst"></push-lamp>
</div>
</div>

user module:

define(['angular', 'require'], function (angular, require) {
  'use strict';

  var userModule = angular.module('userModule', ['maUiApp'])

  .component('pushLamp', {
      template: `<div class="indicator" ng-click="$ctrl.pushed(this.$ctrl.point.xid)" ng-class="$ctrl.point.renderedValue"<br/>{{$ctrl.point.xid}}; {{$ctrl.point.name}}<br/>{{$ctrl.point.tags.indText}}</div>`,
      bindings: {
        point: '<'
      },
      controller: function() {
        var self = this;

        self.$onChanges = function (changes) {
          if (changes.point) {
            console.log(self.point.value);
          }
        }

        self.pushed = function(pid) {
          var swXid = 'DP_sw_' + pid.substr(7);
          // toggle point.xid=swXid
          console.log(swXid, ' was clicked');
        }

      }
  });
  return userModule;

}); // define

If I could just get your opinion on preferred way to toggle point... also would appreciate any comments on view syntax/order.

Best.

Jared Wiltshire

@bobday said in Help getting ma-watch-list-get points into a controller/service:

If I could just get your opinion on preferred way to toggle point... also would appreciate any comments on view syntax/order.

You should use the maPoint class' toggleValue() method. So in your controller's pushed() method you could just call self.point.toggleValue() or self.point.setValue(true) etc.

However I note that you want to toggle a different point, so I would suggest this-

Change your point attribute/binding to points and pass the whole points array though
Locate the two points you wish to use in the $onChanges() method when the points array changes

So bringing it together -

define(['angular', 'require'], function (angular, require) {
  'use strict';

  var userModule = angular.module('userModule', ['maUiApp'])

  .component('pushLamp', {
      template: `<div class="indicator" ng-click="$ctrl.pushed()" ng-class="$ctrl.point.renderedValue">
        {{$ctrl.point.xid}}<br>{{$ctrl.point.name}}<br>{{$ctrl.point.tags.indText}}
      </div>`,
      bindings: {
        points: '<',
        target: '@'
      },
      controller: function() {
        this.$onChanges = function (changes) {
          if (changes.points && Array.isArray(this.points)) {
            this.point = this.points.find(p => p.xid === 'DP_ind_' + this.target);
            this.switchPoint = this.points.find(p => p.xid === 'DP_sw_' + this.target);
          }
        }

        this.pushed = function() {
            if (this.switchPoint) {
                this.switchPoint.toggleValue();
            }
        }

      }
  });
  return userModule;

}); // define

PS the template was not properly formed and you had an extra this. at the front of this expression -
ng-click="$ctrl.pushed(this.$ctrl.point.xid)"

Suggestions -

Find the points via tags rather than by XIDs (In the past we relied on encoding information into the XID, however with the advent of tags we can do this more easily)
Use an ES6 class for the controller as per my previous post

BobDay

@Jared-Wiltshire - thanks for all that. That works if I put the switchpoints on the watchlist of course - I hadn't thought of that - I was looking for the correct method to get/set a point directly.

I'm still not getting the point.value or any of the other properties added via <ma-point-value> in the bound points variable via $ctrl. Odd, though, if I log this.point, everything shows up in the object - just shows undefined if I try to access this.point.value. Shows up via template though.

I'm stumped...

<div ng-init="page = {}"></div>

<ma-watch-list-get ng-model="indicatorWl.watchlist" parameters="indicatorWl.parameters" on-points-change="page.points = $points" id="wl-indicator-id" watch-list-xid="WL_Indicator"></ma-watch-list-get>
<ma-get-point-value points="page.points"></ma-get-point-value>

<div>
    <push-lamp points="page.points" target="H2OT1"></push-lamp>
    <push-lamp points="page.points" target="H2OT2"></push-lamp>
    ...
</div>

console.log(this.point.xid, this.point.value);
//console: 
DP_ind_H2OT1 undefined
DP_ind_H2OT2 undefined
...

console.log(this.point);

//console:
{id: 164, xid: "DP_ind_H2OT1", name: "T1-Water", enabled: true, deviceName: "buttonTest", …}
chartColour: ""
chartRenderer: {timePeriod: {…}, type: "chartRendererImage"}
convertedValue: 13
dataSourceEditRoles: []
dataSourceId: 33
dataSourceName: "buttonTest"
dataSourceTypeName: "VIRTUAL"
dataSourceXid: "DS_buttonTest"
deviceName: "buttonTest"
enabled: true
id: 164
lastPayload: {xid: "DP_ind_H2OT1", event: "UPDATE", value: {…}, renderedValue: "green", convertedValue: 13, …}
loggingProperties: {loggingType: "INTERVAL", intervalLoggingType: "AVERAGE", intervalLoggingPeriod: {…}, tolerance: 0, discardExtremeValues: false, …}
name: "T1-Water"
originalId: "DP_ind_H2OT1"
plotType: "SPLINE"
pointFolderId: 0
pointLocator: {offset: 0, min: 12, max: 53, period: 0, values: Array(0), …}
preventSetExtremeValues: false
purgeOverride: false
readPermission: ""
renderedColor: "#32cd32"
renderedValue: "green"
rollup: "NONE"
running: true
setPermission: ""
simplifyTarget: 5000
simplifyTolerance: 10
simplifyType: "NONE"
tags: {indText: "H2O", loc: "tank1", xid: "vm.pid", type: "indicator"}
templateXid: null
textRenderer: {useUnitAsSuffix: false, format: "0", rangeValues: Array(6), type: "textRendererRange"}
time: 1574382356912
unit: ""
unreliable: false
useIntegralUnit: false
useRenderedUnit: false
value: 13
xid: "DP_ind_H2OT1"
_textRenderer: {rangeValues: Array(6)}
dataType: (...)
isEnabled: (...)
tagsString: (...)
valueGetterSetter: (...)
__proto__: Object

EDIT Indeed, when looping through this.point (from within the controller),

angular.forEach(this.point, function(value, key){
              console.log(key + ':', value);
            });

none of the point-value properties exist in the point object:

//console
id: 164
xid: DP_ind_H2OT1
name: T1-Water
enabled: true
deviceName: buttonTest
readPermission: 
setPermission: 
pointFolderId: 0
purgeOverride: false
unit: 
useIntegralUnit: false
useRenderedUnit: false
pointLocator: {offset: 0, min: 12, max: 53, period: 0, values: Array(0), …}
chartColour: 
plotType: SPLINE
loggingProperties: {loggingType: "INTERVAL", intervalLoggingType: "AVERAGE", intervalLoggingPeriod: {…}, tolerance: 0, discardExtremeValues: false, …}
textRenderer: {useUnitAsSuffix: false, format: "0", rangeValues: Array(6), type: "textRendererRange"}
chartRenderer: {timePeriod: {…}, type: "chartRendererImage"}
rollup: NONE
simplifyType: NONE
simplifyTolerance: 10
simplifyTarget: 5000
preventSetExtremeValues: false
templateXid: null
dataSourceId: 33
dataSourceXid: DS_buttonTest
dataSourceName: buttonTest
dataSourceTypeName: VIRTUAL
dataSourceEditRoles: []
tags: {indText: "H2O", loc: "tank1", type: "indicator"}
originalId: DP_ind_H2OT1

Assume I have a scoping or async issue, but can't seem to solve it.

I'll follow your suggestions when I have this licked - thank you!

Jared Wiltshire

@bobday said in Help getting ma-watch-list-get points into a controller/service:

@Jared-Wiltshire - thanks for all that. That works if I put the switchpoints on the watchlist of course - I hadn't thought of that - I was looking for the correct method to get/set a point directly.

You can definitely still just fetch the datapoint by XID using the maPoint service. But you would also then have to get its current value before setting the new value...

@bobday said in Help getting ma-watch-list-get points into a controller/service:

I'm still not getting the point.value or any of the other properties added via <ma-point-value> in the bound points variable via $ctrl. Odd, though, if I log this.point, everything shows up in the object - just shows undefined if I try to access this.point.value. Shows up via template though.

OK, I'm not following exactly where you are putting the console.log() statements so it is pretty hard for me to say what is happening. The first block of output you posted does have a value property, and it looks like it is from inside the component controller as you used console.log(this.point); if this was in the template it would be $ctrl.point.

Do this -

Put <pre ng-bind="page.points[0].value"></pre> in your page and verify it has a value
Put a console.log(this.point.value) inside your component controller's pushed() method and verify it has a value, you probably cant do this in the $onChanges() method as it may not have a value at that time
Put <pre ng-bind="$ctrl.point.value"></pre> in your component template and verify it has a value

BobDay

@Jared-Wiltshire Ok - sorry for the confusion.

<pre ng-bind="page.points[0].value"></pre> renders the value on the page;
console.log(this.point.value) in pushed() renders the value when element is clicked;
<pre ng-bind="$ctrl.point.value"></pre> in template renders the value, (as well as does {{$ctrl.point.value}});

@Jared-Wiltshire said: ...The first block of output you posted does have a value property, and it looks like it is from inside the component controller as you used console.log(this.point);

Yes, however, this from SO:

The output of console.log(anObject) is misleading; the state of the object displayed is only resolved when you expand the > in the console. It is not the state of the object when you console.log'd the object.

...which I learned 3 years ago, but completely forgot!

using console.log(JSON.stringify(this.point) (inside the controller) returns:

{"id":169,"xid":"DP_ind_H2OMX","name":"MX-Water","enabled":true,"deviceName":"buttonTest","readPermission":"","setPermission":"","pointFolderId":0,"purgeOverride":false,"unit":"","useIntegralUnit":false,"useRenderedUnit":false,"pointLocator":{"offset":0,"min":12,"max":53,"period":0,"values":[],"change":10,"startValue":"12","maxChange":0,"volatility":0,"roll":false,"amplitude":0,"phaseShift":0,"attractionPointXid":"DP_ch_current","modelType":"PL.VIRTUAL","changeType":"INCREMENT_ANALOG","dataType":"NUMERIC","settable":false,"relinquishable":false},"chartColour":"","plotType":"SPLINE","loggingProperties":{"loggingType":"INTERVAL","intervalLoggingType":"AVERAGE","intervalLoggingPeriod":{"periods":1,"type":"MINUTES"},"tolerance":0,"discardExtremeValues":false,"overrideIntervalLoggingSamples":false,"cacheSize":1},"textRenderer":{"useUnitAsSuffix":false,"format":"0","rangeValues":[{"from":0,"to":9,"text":"off","colour":null},{"from":10,"to":19,"text":"green","colour":"green"},{"from":20,"to":29,"text":"yellow","colour":"yellow"},{"from":30,"to":39,"text":"red","colour":"red"},{"from":40,"to":49,"text":"blue","colour":"blue"},{"from":50,"to":59,"text":"white","colour":"#cdcdcd"}],"type":"textRendererRange"},"chartRenderer":{"timePeriod":{"periods":1,"type":"DAYS"},"type":"chartRendererImage"},"rollup":"NONE","simplifyType":"NONE","simplifyTolerance":10,"simplifyTarget":5000,"preventSetExtremeValues":false,"templateXid":null,"dataSourceId":33,"dataSourceXid":"DS_buttonTest","dataSourceName":"buttonTest","dataSourceTypeName":"VIRTUAL","dataSourceEditRoles":[],"tags":{"indText":"H2O","loc":"mixer","type":"indicator"},"originalId":"DP_ind_H2OMX"}

clearly without the value, etc. properties.

EDIT Solved - I think ;-). The reason the .value shows up in pushed() is that it is on the object by the time the element is clicked, while not so, immediately after the controller. console.log places a static prototype on the console, but does not evaluate its properties until the triangle is clicked, per the comment above. Putting the log in a $timeout solved the problem. The console.log is a bit of red herring here, as it all works in the template so far...

Apologies for the lack of diligence on my part.

Incidentally, what is the reason for the array check in:
if (changes.points && Array.isArray($ctrl.points))?

Jared Wiltshire

Glad you got it sorted. The array check is simply to ensure that you passed the correct object to the attribute, also a check against undefined values which might happen if you set the attribute to a variable name which might not be set initially.

BobDay

Thanks for all the help.