I've read the help page and several forum posts describing things that the "Use multiple write commands only" option has helped fix, but what I am still unsure of, is how it actually works.
When we chose that option while troubleshooting why commands being issued to a pump were being overwritten we didn't see any differences in the results. That may be because it just wasn't the fix, or we are trying to send the commands in a way that is incompatible with the multiple write option.
For our setup we have a scripting data source that uses multiple .set commands in a row to turn a modbus water pump on and set several addresses as we need. Will checking the multiple commands box spool up a certain number of commands, or wait a few milliseconds for the various set commands to be issued and spit out the consecutive registers as one command to the pump?
Or, would we have to change the way we set the register values in our scripting data source to better suit the multiple write commands option?