Question about mango connect equipment .

---

We now have an equipment connected with the mango software and we now have some questions as below:
1, If I want to replace the "My Mango Automation "mark on the upright and"@2014 Infinite Automation Systems Inc.all right reserved" the downside in the "data point" button,how to do?

2, Why the alarm flag not flash while there is an alarm?

3, Is it possible to display the chart more specifically by year, month, day, hour and minute like stock display? How to set up and how to adjust the initial time? like below stock display.
[img]
http://www.aastocks.com/en/stock/stocktrend.aspx?&symbol=01999
4, What is the difference between mango on the Linux and Windows?

5, How to setup to make it alarm by email only once in the email alarming system when have alamr trigger?

6, When downloading the Excel, how to mark the download time and separate the figures already downloaded ( that mean tell you the data have been download at time that you have downloaded data.
7, How to make it keep displaying alarm the information after the delete of nosql?the way "Upload it somewhere that I can download it" how to operate and tell me the step.

8, How to enable me to receive the email or add the information I want without the displaying of "My Mango Automation" and "Mango Automation" in received email
example:
" My Mango Automation - Event active notification
Urgent 15:53:09 - PED_Lamp- Temp High limit Alarm
Note This event will automatically return to normal when the event criteria are no longer satisfied
Mango Automation
This email was sent by an automated service. It has been sent to you because you have been included on the mailing list of a Mango Automation email notification. Please do not reply to this email. under the alarming circumstances" and replace my content that want to modify.
9, How to make it possible to send the message to mobile phone under the Windows mango 2.4.2 version?how to setting?

and have a question 10:How to change "My Mango Automation" name on the page to the other name.

11. and I test mango 2.4.2, 2.4.0 .2.2.2,2.1.3 version.but I find have no any protocol in data sources button.why?

@edmond said:

3, Is it possible to display the chart more specifically by year, month, day, hour and minute like stock display? How to set up and how to adjust the initial time? like below stock display.

You could create a graphical view, and then insert your charts in there. But there is no way to change the properties of the graph other than the plot colour and time range.
If you use DGLux you can create much richer graphs.

@edmond said:

and have a question 10:How to change "My Mango Automation" name on the page to the other name.

System Settings > Instance Description

@edmond said:

11. and I test mango 2.4.2, 2.4.0 .2.2.2,2.1.3 version.but I find have no any protocol in data sources button.why?

Perhaps you need to download and install the modules..

@edmond said:

We now have an equipment connected with the mango software and we now have some questions as below:
1, If I want to replace the "My Mango Automation "mark on the upright and"@2014 Infinite Automation Systems Inc.all right reserved" the downside in the "data point" button,how to do?

2, Why the alarm flag not flash while there is an alarm?

3, Is it possible to display the chart more specifically by year, month, day, hour and minute like stock display? How to set up and how to adjust the initial time? like below stock display.
[img]
http://www.aastocks.com/en/stock/stocktrend.aspx?&symbol=01999
4, What is the difference between mango on the Linux and Windows?

5, How to setup to make it alarm by email only once in the email alarming system when have alamr trigger?

6, When downloading the Excel, how to mark the download time and separate the figures already downloaded ( that mean tell you the data have been download at time that you have downloaded data.
7, How to make it keep displaying alarm the information after the delete of nosql?the way "Upload it somewhere that I can download it" how to operate and tell me the step.

8, How to enable me to receive the email or add the information I want without the displaying of "My Mango Automation" and "Mango Automation" in received email
example:
" My Mango Automation - Event active notification
Urgent 15:53:09 - PED_Lamp- Temp High limit Alarm
Note This event will automatically return to normal when the event criteria are no longer satisfied
Mango Automation
This email was sent by an automated service. It has been sent to you because you have been included on the mailing list of a Mango Automation email notification. Please do not reply to this email. under the alarming circumstances" and replace my content that want to modify.
9, How to make it possible to send the message to mobile phone under the Windows mango 2.4.2 version?how to setting?

1. You can replace the "My Mango Automation" text from the system settings pages. While removing the copyright is possible, we don't precisely encourage it unless you're known to us as a reseller.

2. While there are occasional differences, such as the syntax to use in process event handlers, it is 100% java and independent.

3. You can edit the files used to compose the emails in Mango/ftl/*

4. There is a Twilio module that performs this function, there are command line tools you can invoke with the event handler, and you can email the carrier redirect address, i.e. 5551234567@vtext.com (Verizon).

9. There is a Twilio module that performs this function, there are command line tools you can invoke with the event handler, and you can email the carrier redirect address, i.e. 5551234567@vtext.com (Verizon).

Have any detail step?

edmond wrote:

3, Is it possible to display the chart more specifically by year, month, day, hour and minute like stock display? How to set up and how to adjust the initial time? like below stock display.

You could create a graphical view, and then insert your charts in there. But there is no way to change the properties of the graph other than the plot colour and time range.
If you use DGLux you can create much richer graphs.

How to create a graphical view and insert my chart in there?whether have a example?

Hi Edmond,

You will find all the help file and documentation in Mango with the blue "?" icons. If you go to the graphics view and you will see this icon which will explain how to use it.

Let me know if that helps,
Joel.

Thanks
In data point screen the statistics icon.

If I want to change the the start time Whether is it will be select change?