@MattFox said in Dashboard designer show units:
That will throw the units designated to each point after the value
Unfortunately, both options have no effect and the unit is not displayed behind the presented value.
With rendered nothing changed and witch converted the value become integer.
Is it not possible to add the unit as text?
@MattFox Happy holidays to you too!
<div class="ma-designer-root" id="57987731-3099-47f5-a55e-ad97e9594147" style="width: 1366px; height: 768px; position: relative;">
<ma-point-value id="27c8eabd-3a7b-4119-a98d-14956b9cedfe" data-point-details="false" enable-popup="up" min-event-level="NONE" style="position: absolute; left: 472px; top: 60px; width: 40px; height: 30px;" point-xid="DP_a616c900-4808-4397-bffb-e311708de9d1" flash-on-change="true" quick-info="true" hide-event-indicator="false" disable-event-popup="false"></ma-point-value>
<img id="b54bb538-2dea-412e-9a10-bdcb459a0439" style="position: absolute; left: 90px; top: 148px; z-index: 1;" src="/rest/latest/file-stores/default/EasyIO/2D/heating/devback1.png">
<ma-switch-img id="66701833-86fb-4163-b12d-2dafa2a852d6" style="position: absolute; left: 117px; top: 208px; z-index: 1;" point-xid="DP_19625696-e6af-4992-858e-817a543172e7" src0="/rest/latest/file-stores/default/EasyIO/2D/heating/gasburneroff.png" src1="/rest/latest/file-stores/default/EasyIO/2D/heating/gasburneron.png" src2="/rest/latest/file-stores/default/EasyIO/2D/heating/gasburneralarm.png" src3="/rest/latest/file-stores/default/EasyIO/2D/heating/gasburnermanual.png"></ma-switch-img>
<img id="c575d30c-2746-454f-b37a-52d846a6b371" style="position: absolute; left: 150px; top: 110px; width: 400px; height: 10px; z-index: 0;" src="/rest/latest/file-stores/default/EasyIO/2D/pipes10pt/Hot H50.png">
<img id="bfb20456-f7ca-45fe-b779-266746ccd4af" style="position: absolute; left: 140px; top: 110px; width: 10px; z-index: 0; height: 40px;" src="/rest/latest/file-stores/default/EasyIO/2D/pipes10pt/Hot V30.png">
<img id="67378a7f-7960-47c8-ae2e-3594ec8dfb47" style="position: absolute; left: 230px; top: 190px; width: 10px; height: 110px; z-index: 0;" src="/rest/latest/file-stores/default/EasyIO/2D/pipes10pt/Varm V30.png">
<img id="0d671889-ecbf-469d-bd05-9b7aef631270" style="position: absolute; left: 140px; top: 300px; width: 100px; height: 10px;" src="/rest/latest/file-stores/default/EasyIO/2D/pipes10pt/Varm H30.png">
<img id="05da67ca-dbd5-4a4e-98f8-6b212805113b" style="position: absolute; left: 140px; top: 240px; width: 10px; height: 70px; z-index: 0;" src="/rest/latest/file-stores/default/EasyIO/2D/pipes10pt/Varm V30.png">
<img id="f983bca8-62ef-4c0d-95e6-709a85bd8929" style="position: absolute; left: 230px; top: 183px; width: 320px; height: 10px;" src="/rest/latest/file-stores/default/EasyIO/2D/pipes10pt/Varm H30.png">
<img id="c2fa5dba-4a89-4fcd-ac79-4a056a339ece" style="position: absolute; left: 260px; top: 90px;" src="/rest/latest/file-stores/default/EasyIO/2D/heating/tankback1.png">
<img id="d1614489-968c-497c-830d-6e26d91d8d8a" style="position: absolute; left: 481px; top: 83px; width: 19px; height: 30px;" src="/rest/latest/file-stores/default/EasyIO/2D/sensors/RP40T.png">
<img id="7013d1ea-651a-4ffa-a436-4257ac6f86af" style="position: absolute; left: 481px; top: 190px; width: 19px; height: 30px;" src="/rest/latest/file-stores/default/EasyIO/2D/sensors/RY40B.png">
<ma-switch-img id="7041d03d-adbf-44c2-8b78-89724897a05f" style="position: absolute; left: 380px; top: 100px; width: 32px; height: 32px;" point-xid="DP_3414e40c-13b5-44f1-a74e-735210b7af89" src0="/rest/latest/file-stores/default/EasyIO/2D/heating/pumpRoff.png" src1="/rest/latest/file-stores/default/EasyIO/2D/heating/pumpRon.png" src2="/rest/latest/file-stores/default/EasyIO/2D/heating/pumpRalarm.png" src3="/rest/latest/file-stores/default/EasyIO/2D/heating/pumpRmanual.png"></ma-switch-img>
<ma-point-value id="db1da63f-9b21-40c3-bb5d-7104dc4cc632" data-point-details="false" enable-popup="up" min-event-level="NONE" style="position: absolute; left: 474px; top: 223px; width: 40px; height: 30px;" point-xid="DP_8ad6fb93-2069-49fa-9c80-07af5094fc75" flash-on-change="true" quick-info="true" hide-event-indicator="false" disable-event-popup="false"></ma-point-value>
<ma-point-value id="dc656184-aa4f-49c2-aee8-430d8b0f7b1a" data-point-details="false" enable-popup="up" min-event-level="NONE" style="position: absolute; top: 73px; width: 90px; height: 20px; left: 350px; text-align: center;" point-xid="DP_3414e40c-13b5-44f1-a74e-735210b7af89" quick-info="true" disable-event-popup="true"></ma-point-value>
<ma-point-value id="651fee2d-2c3f-4b19-abf5-b67d61900b57" data-point-details="false" enable-popup="up" min-event-level="NONE" style="position: absolute; top: 160px; width: 90px; height: 20px; left: 96px; text-align: center; z-index: 2;" point-xid="DP_19625696-e6af-4992-858e-817a543172e7" quick-info="true" disable-event-popup="true"></ma-point-value>
<img id="86fbd5ff-ace3-48b3-941e-c074141e169f" style="position: absolute; left: 560px; top: 110px; width: 33px; height: 8px;" src="/rest/latest/file-stores/default/EasyIO/2D/ventilation/arrowTR.png">
<img id="c73d46cb-0de9-4d70-9aff-b9de6cb45024" style="position: absolute; left: 560px; top: 184px; width: 33px; height: 8px;" src="/rest/latest/file-stores/default/EasyIO/2D/ventilation/arrowTL.png">
<ma-button id="d9a57f60-5d1d-4f37-a2ed-3f15f244eaa4" raised="true" style="position: absolute; left: 602px; top: 125px;" label="CV groepen" ui-sref="ui.deCirkelCvGroepen"></ma-button>
</div>
Hi,
I have an mqtt data source with a number of data points. When creating the data points I selected the correct unit, but I cannot see this in the dashboard designer.
Greetings Mark
When I execute your command, a container is created, but without Mango being installed.
Since my knowledge is too limited, I'm going to install mango in a windows environment.
Still, thank you for your efforts!
I have used the file below and now I get the following message:
++ HOME environment variable is /opt/mango
++ mango_paths_home is /opt/mango
+++++ Mango configuration found on
++ mango_script_dir is /opt/mango/bin
++ mango_paths_data is /opt/mango
Mango installation/home directory is /opt/mango
Mango data path is /opt/mango
Starting Mango
Mango started (PID 16)
The container returns status "exited"
FROM openjdk:17-ea-17-jdk
COPY free-m2m2-core-5.0.3.zip /tmp
RUN mkdir -p /opt/mango
&& microdnf install -y unzip openssl
&& unzip /tmp/free-m2m2-core-5.0.3.zip -d /opt/mango
&& cd /opt/mango
ENV HOME /opt/mango
ENV MA_HOME /opt/mango
ENV MA_CP $MA_HOME/overrides/classes:$MA_HOME/classes:$MA_HOME/overrides/properties:$MA_HOME/overrides/lib/:$MA_HOME/lib/
EXPOSE 8443
WORKDIR /opt/mango
ENTRYPOINT exec bin/start-mango.sh $MA_CP -Dma.home=$MA_HOME -Djava.library.path=$MA_HOME/overrides/lib:$MA_HOME/lib:/usr/lib/jni/:$PATH com.serotonin.m2m2.Main
Sorry but my knowledge of Linux is limited.
I put all the files in the right place and then used the docker file to install mango. Have I forgotten something or done it wrong?
I used your dockerfile to install mango but I get the following error message when starting the container:
Error: Could not find or load main class com.serotonin.m2m2.Main
Caused by: java.lang.ClassNotFoundException: com.serotonin.m2m2.Main
Do you know how I can solve this?
Hi,
I want to send the command below with mqtt with a binary switch. I only get the command correctly executed when I create the item as alphanumeric and manually enter the status. Does anyone know how I send the command off / on through a binary switch with mqtt?
shellies/<model>-<deviceid>/relay/0/command accepts on, off or toggle and applies accordingly
Can anyone help me?
@mattfox said in Http sender 3th party:
var parameters = {
"turn": relay.value==1?'on':'off'
I have just tried the following script but unfortunately this does not work.
@phildunlap 2 years ago I received a script from you for switching lighting. I now want to use this for another command. I would like to execute the following command:
Can you help me with the right script?
Dear,
I have a heat pump with modbus and I would like to read it. With "modscan" I manage to read various values, but not with "mango". The data from "modscan" is Modbus RTU Decimal.
As an example I used address 1026. The value of this point is 50 (degrees).
Can someone help me with this?
Here is an update of the above script. I have set the ID number of the lighting fixed.
I have slightly modified the script so that it can also be used to dim lighting.
Dear Phil,
Thank you very much! The 2nd option works fine for me. It is now very easy to switch multiple points in domoticz.
Thanks again!
Dear,
Besides Mango, I also use Domoticz to control my lighting. I would like to turn on my lighting using Mango. With the command: "192.168.178.100:8081/json.htm?type=command¶m=switchlight&idx=6&switchcmd=On" I can turn on the desired light.
I would like to send this command through a virtual point with http sender.
When I put the complete command in the url bar and test this it works. However, I do not understand how I can sent this command by a virtual point.
thank you in advance.
Hello,
I use mango (3.3.4) for home use and I am looking for the zigbee module. At downloads I only can find a module for version 2.7 and I was curious if there is a module available for my version.
thanks in advance