Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.
New automation user
-
hi all,
as i titled this post,
i'm totally new on mango automation , can anybody here provide me required settings to add new MODbus serial data source and data point which will controlling lights . i used M-7053 16-channel Non-Isolated digital input module . -
Hi Joe, welcome to the forum. This will really depend on the required settings from the device. Start by setting the baud rate and selecting your serial port. Then I would use the test tools to read some of the registers to determine which ones you want and that communication is working. Next add data points and set your polling rate and enable the data source and data points. You should then be able to see the data updating on the Watch List.
Here is a helpful article: https://help.infiniteautomation.com/configuring-data-sources-and-data-points/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login