Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.
IPv6 & IPv4
-
Dear ALL
I have disable the IPv6 in system setting 
But in eth0 IPv4 configure show as picture 
Any suggestion?
-
@Jenny said:
Dear ALL
I have disable the IPv6 in system setting
But in eth0 IPv4 configure show as picture
Any suggestion? -
Your pictures are hosted privately.
If you are trying to disable one sort of IP altogether for some reason, that is beyond the ability of the MangoES Configuration module. I believe you would be able to comment out the inet6 lines in /etc/network/interfaces to prevent it bringing it's IPv6 functions online. There are other modifications you can make at the operating system level to ignore pings, discovery broadcasts (I'm guessing this is what you don't want) and similar.
It's looks like there are better ways than editing the interfaces file:
http://superuser.com/questions/33196/how-to-disable-autoconfiguration-on-ipv6-in-linux -
Hello Phildunlap,
Thanks for kindly reply.
I have disable IPv6 in webmin.
webmin capture
In MangoES system configure page eth0 IPv4 shows ip in IPv6 style.
configure ip capture
