Is there a way to control the y-axis scaling on an image chart within a graphic view? I would like to set the min and max explicitly instead of having it set based on the range of the data.
Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.
W
Latest posts made by wave1234
-
Y-axis scaling in image chartposted in How-To
-
RE: Y-axis scaling in image chartposted in How-To
Is there a way to control the y-axis scaling on an image chart within a graphic view? I would like to set the min and max explicitly instead of having it set based on the range of the data.
-
Setting point values in Graphic Viewposted in User help
I have settable points (either from MODBUS IP source or Virtual source) which are settable through the Watch List or the Point Details but are not settable through a Graphic view. If I hover over the graphic point I do not get the wrench icon, only the info icon. It does this whether I'm in edit mode or viewing mode. I am logged in as administrator and created the Graphic view myself so I should have permission to set the point. I've tried with and without the Settable Override check box marked. I assume it should be unmarked to work the way I want it to. Is there another setting somewhere I need to enable to make settable points settable within graphic views?
-
RE: Setting point values in Graphic Viewposted in User help
I have settable points (either from MODBUS IP source or Virtual source) which are settable through the Watch List or the Point Details but are not settable through a Graphic view. If I hover over the graphic point I do not get the wrench icon, only the info icon. It does this whether I'm in edit mode or viewing mode. I am logged in as administrator and created the Graphic view myself so I should have permission to set the point. I've tried with and without the Settable Override check box marked. I assume it should be unmarked to work the way I want it to. Is there another setting somewhere I need to enable to make settable points settable within graphic views?
-
RE: Event detector with durationposted in User help
Here is an example. I have two event detectors monitoring the same point. Both are low limit detectors with an information alarm level and a limit of 5. One is set with duration 0 seconds. The other with duration 1 second.
When the following point history passed by:
[list]Value Time Annotation
8.2% 13:18:43
1.2% 13:18:13
0.5% 13:17:43
0.6% 13:17:13
0.9% 13:16:43
2.5% 13:16:13
6.7% 13:15:43
7.0% 13:15:13
7.1% 13:14:43
7.0% 13:14:13
7.1% 13:13:13
7.0% 13:12:13
6.8% 13:11:43
7.0% 13:11:13
7.1% 13:10:13
7.0% 13:09:43
7.1% 13:09:13
7.0% 13:07:43
7.1% 13:06:13
6.9% 13:05:13
7.1% 13:04:13
6.9% 13:03:13
7.1% 13:01:43
6.8% 13:00:43
7.1% 12:59:43[/list]Only the 0 second event tripped.
Logging settings are when point value changes by 0.1, no discarding extreme values, and cache size 1.
Had the same problem with version 1.10 and 1.11.
-
Event detector with durationposted in User help
I'm having trouble setting up a new event detector. If I set the duration to anything other than 0 seconds, it never detects an event despite being in the proper state. I have tried High limit alarms for a numeric Point and a State alarm for a Binary point. I must be missing something simple. Help?
-
RE: Event detector with durationposted in User help
I'm having trouble setting up a new event detector. If I set the duration to anything other than 0 seconds, it never detects an event despite being in the proper state. I have tried High limit alarms for a numeric Point and a State alarm for a Binary point. I must be missing something simple. Help?