@terrypacker said in DNP3 Analog Data Point:

Udara,

I don't have a DNP3 Device with an Analog Output to test with, but I did find a bug in the DNP34J source code. I've made some changes that I hope will work. Here is a new module for you to test with. Can you confirm that it now works?

You will probably have to rename the downloaded file as

m2m2-dnp3-1.6.2.zip

Thanks,
Terry

0_1462484371554_m2m2-dnp3-1.6.2.zip

Hi Terry,

I tested the new DNP3 module on my Mango 2.7 installation on windows and it now works as intended. It lets me set multiple analog output points.
I will test it on my Mango ES installation too.

Thank you very much.

@phildunlap said in DNP3 Analog Data Point:

Hi Udara, you will need to place the zip file into your Mango's web/modules directory, renaming as instructed by Terry, and then restart your Mango instance.

You may wish to copy your existing web/modules/dnp3 directory out of web/modules in the event you desire rolling back to that version, as it would be overwritten by Mango's unzipping of the new one.

Thank you. It now works.

If i was to use the module in Mango ES is it the same installation procedure ?

@terrypacker

Hi Terry,

I will let you know soon.
Can you tell me how to get the new module installed on the existing mango installation ?

Thank You

Hi all,

I am using MangoES as a DNp3 master to receive data from many slave devices.
I can receive both analog and digital data points and I can send many digital outputs as I like.

However I can only send one Analog Output data (data point number 0).
I have noticed that when i update any other analog data point only the data point number 0 gets updated instead.

Is there any possibility of fixing this issue ?

Thanks!

@phildunlap
Thank You very much. That helped a lot.

Hi all,

Is it possible to get a simple For loop working in scripting data source on MangoES ?
I have the following code running :

for ( var i = 0; LineCurrent1 > 271 ; i + 1) {

value.set(i);

}
The aim of the code is to increment a value when a condition is met.

Is this something I will be able to do using scripting data sources ?

Thank You!