Hi,

Can anyone tell me what files are responsible for encoding the URL's sent via the http sender?

If i create a sending string, from a data point, such as... 'abc&__value=xyz' and the sending parameter = __point

It should send http://host?__point=abc&__value=xyz but instead it converts everything in the data point string...

so the receiver see's http://host?__point=abc%26__value%3Dxyz.

Now a php server i've running can cope with this, but what i'd like to do it publish to a mango http receiver.

In this case, the http receiver doesn't decode the string, and takes it as it is and so fails.

Is the encoding down to the dojo uri.js file?

Or is the error in that the http receiver is not decoding the url and reading it literally?

Thanks

Neil

Hi,

Can anyone tell me what files are responsible for encoding the URL's sent via the http sender?

If i create a sending string, from a data point, such as... 'abc&__value=xyz' and the sending parameter = __point

It should send http://host?__point=abc&__value=xyz but instead it converts everything in the data point string...

so the receiver see's http://host?__point=abc%26__value%3Dxyz.

Now a php server i've running can cope with this, but what i'd like to do it publish to a mango http receiver.

In this case, the http receiver doesn't decode the string, and takes it as it is and so fails.

Is the encoding down to the dojo uri.js file?

Or is the error in that the http receiver is not decoding the url and reading it literally?

Thanks

Neil

Hi,

Does anyone know why when data is received on this data source, the timestamp matches the transmission date of the source... like a curl GET but its always 1 sec behind in appearing in mango?

I was hoping to use triggers for instantaneous updates on real time events, but the 1 sec delay negates its usefulness.

Thanks

Skiv

Hi,

Does anyone know why when data is received on this data source, the timestamp matches the transmission date of the source... like a curl GET but its always 1 sec behind in appearing in mango?

I was hoping to use triggers for instantaneous updates on real time events, but the 1 sec delay negates its usefulness.

Thanks

Skiv

Hi,

I use event process commands quite a lot, but i now have a need to pass the value of a mango variable to the batch file...

Can this be done?

Or would i need to trigger the batch file from a server side script?

Is that allowed? Any tips on how i could do that?

Thanks

Skiv

Hi,

I use event process commands quite a lot, but i now have a need to pass the value of a mango variable to the batch file...

Can this be done?

Or would i need to trigger the batch file from a server side script?

Is that allowed? Any tips on how i could do that?

Thanks

Skiv

this browser has always been my choice for using mango, but in recent years, revisions have made mango less functional....

i.e. alarm banner at top used to flash, doesn't anymore...

now i'm seeing errors in the logs where google chrome clients connect...

WARN 2012-04-25 12:56:49,828 (com.serotonin.mango.web.dwr.MiscDwr.jsError:193) - Javascript error
Description: Script error.
Page:
Line: 0
Browser name: Chrome
Browser version: 18
osName: Windows
location: http://xxx.xxx.xxx.xxx:8080/login.htm
WARN 2012-04-25 12:58:10,750 (com.serotonin.mango.web.dwr.MiscDwr.jsError:193) - Javascript error
Description: Script error.
Page:
Line: 0
Browser name: Chrome
Browser version: 18
osName: Windows
location: http://xxx.xxx.xxx.xxx:8080/views.shtm?viewId=6

does anyone have any thoughts?

no such errors with IE8 clients (but i hate this browser, too slow).

think i'm using 1.12.4

thanks

skiv

this browser has always been my choice for using mango, but in recent years, revisions have made mango less functional....

i.e. alarm banner at top used to flash, doesn't anymore...

now i'm seeing errors in the logs where google chrome clients connect...

WARN 2012-04-25 12:56:49,828 (com.serotonin.mango.web.dwr.MiscDwr.jsError:193) - Javascript error
Description: Script error.
Page:
Line: 0
Browser name: Chrome
Browser version: 18
osName: Windows
location: http://xxx.xxx.xxx.xxx:8080/login.htm
WARN 2012-04-25 12:58:10,750 (com.serotonin.mango.web.dwr.MiscDwr.jsError:193) - Javascript error
Description: Script error.
Page:
Line: 0
Browser name: Chrome
Browser version: 18
osName: Windows
location: http://xxx.xxx.xxx.xxx:8080/views.shtm?viewId=6

does anyone have any thoughts?

no such errors with IE8 clients (but i hate this browser, too slow).

think i'm using 1.12.4

thanks

skiv

you should look into a suitable modbus gateway...

in my experience, i choose a beijers/mitsy e terminal for transparent modbus/plc connectivity...

anything it can talk to, you can

hi sorry, think its 1.12.4

hi, i use google chrome when constructing mango projects, and i've noticed what maybe a bug when creating mailing lists?

at the moment i'm having to revert to IE (which is dog slow) for this part...

When i create a new mailing list, i cannot overwrite the XID for it, i cannot select users from the drop down list, its just like the page has crashed.

In IE i can do all the above, but i still cannot drag over text to make it blue (and then replace-overwrite it).

Bug in the 'mailing_lists.shtm'??

hi, i use google chrome when constructing mango projects, and i've noticed what maybe a bug when creating mailing lists?

at the moment i'm having to revert to IE (which is dog slow) for this part...

When i create a new mailing list, i cannot overwrite the XID for it, i cannot select users from the drop down list, its just like the page has crashed.

In IE i can do all the above, but i still cannot drag over text to make it blue (and then replace-overwrite it).

Bug in the 'mailing_lists.shtm'??

Hey Matthew,

Long time... how's things?

That's a real shame, the beauty of the individual accounts and web access is the independant nature of things...

Just wasn't right, logging on whilst i knew there was an active alarm present but the event logger says no, because another operator ack it.

Not a problem in a single instance, viewing platform, even if it is VNC'd, but clearly is in a multi login web environment :-/

Hi, been using mango for some time now and spotted something i'd like to see handled different.

Not sure if this is just a setting, but in a multi user environment, it would be very useful if alarms were acknowledged on a per user basis.

For example, local instance on a site, operator acknowledges a fault, but the fault still exists..

I login after the operator has acknowledged this fault, and to me (and any other user) it will appear as if there are no active alarms.

Gives the wrong sense of a systems state.

I see on the options for users, there is a tick box for own audit events, how about ALL events?

thanks

skiv

Hi, been using mango for some time now and spotted something i'd like to see handled different.

Not sure if this is just a setting, but in a multi user environment, it would be very useful if alarms were acknowledged on a per user basis.

For example, local instance on a site, operator acknowledges a fault, but the fault still exists..

I login after the operator has acknowledged this fault, and to me (and any other user) it will appear as if there are no active alarms.

Gives the wrong sense of a systems state.

I see on the options for users, there is a tick box for own audit events, how about ALL events?

thanks

skiv

hi, not sure if this is the right forum, but here goes...

i have some meta points which SUM a real data point (modbus) with a virtual data point (used to provide an offset for calibration purposes).

Because i needed precise update timing (for my data logging), i used to CRON to produce the result.

What i would rather have done is have the meta point update on context and use the polling interval of the real data source as the trigger (i have quantize) selected.

thing is the internal data point will also cause an update and this is undesireable.

it would be nice if i could enter 0 update period or disable it in some other means.

i thought of entering a very long update period, but thats no good.

really need to disable periodic update.

any thoughts?

thanks

skiv

hi, not sure if this is the right forum, but here goes...

i have some meta points which SUM a real data point (modbus) with a virtual data point (used to provide an offset for calibration purposes).

Because i needed precise update timing (for my data logging), i used to CRON to produce the result.

What i would rather have done is have the meta point update on context and use the polling interval of the real data source as the trigger (i have quantize) selected.

thing is the internal data point will also cause an update and this is undesireable.

it would be nice if i could enter 0 update period or disable it in some other means.

i thought of entering a very long update period, but thats no good.

really need to disable periodic update.

any thoughts?

thanks

skiv

i've decided to make 2 data sources...

a/. source with 1 sec polling for realtime data

b/. source with 15min polling and quantize checked

source b is set for logging on time stamp so achieves the desired result.

however, i'm also publishing this data (potentially both sources) with another scada instance retrieving the data.

currently the publising data source is set for updates by changes.

since the source is quantize, it would be nice if i could select 'timestamp' change for the update.

presently i only see option to select 'all changes' which see's the client scada have per second updates, or 'changes only' which fails since the data value might not have changed.

i'm using 1.12.0, has the publishing facility been changed to send updates based on timestamp?

thanks

skiv

hi,

i have a data source which i'm looking to set update on a per second interval.

but i would like to log data every 15 mins.

when producing reports, is it possible to get the 15 min interval quantize, i.e. 0min, 15 min, 30 min, 45 min etc etc.

i have managed to get 1 sec polling with 15 min interval logging ok, but i really need to have it on the times stated, not 15 min elapsed.

for now i've changed the data source polling to every 15 mins and logging to when time stamp changes, but this is not really practical.

live readings need to be update more frequently.

thanks

skiv

hi,

i have a data source which i'm looking to set update on a per second interval.

but i would like to log data every 15 mins.

when producing reports, is it possible to get the 15 min interval quantize, i.e. 0min, 15 min, 30 min, 45 min etc etc.

i have managed to get 1 sec polling with 15 min interval logging ok, but i really need to have it on the times stated, not 15 min elapsed.

for now i've changed the data source polling to every 15 mins and logging to when time stamp changes, but this is not really practical.

live readings need to be update more frequently.

thanks

skiv