Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.

posted in User help

I've installed the Mango application on a full windows XP configurat(ion
Now I can read the OPC item but after few minutes (15 to 20 mn) the system seems to "stop".
No error log but the item values are not refreshed ...

Is this problem allready appeared for someone ?

Do you think that I should test a MySQL storage ?

Thanks for help

posted in User help

I configured Mango (under Linux Ubuntu 10.04) with an OPC server running on Windows XP SP2 (OPC server Siemens S7200)
The OPC DA Properties seems good : I can get all the items of the OPC server.

The problem is when I want to enable the DataSource, nothing append.
The mango.log file show the following error message :

org.openscada.opc.lib.da.AccessBase.connectionStateChanged:199 - Failed to change state (true)
org.jinterop.dcom.common.JIException: The RPC server is unavailable.Please check if COM server is up and running and that route to the COM Server is accessible (A simple "Ping" to the Server machine would do). Also pease confirm if the Windows Firewall is note blocking DCOM access [0x800706BA]

I have checked that the Windows XP Firewall is Off. I also do all the configuration described in the file OPC Configuration ScadaBR (find on this forum) : Access Permissions for all users in the COM Security tab (DCOMCnfg) for the Edit Limits and also for the Launch and Activation Permissions

Does anyone have an idea where the problem is ?

posted in User help

I configured Mango (under Linux Ubuntu 10.04) with an OPC server running on Windows XP SP2 (OPC server Siemens S7200)
The OPC DA Properties seems good : I can get all the items of the OPC server.

The problem is when I want to enable the DataSource, nothing append.
The mango.log file show the following error message :

org.openscada.opc.lib.da.AccessBase.connectionStateChanged:199 - Failed to change state (true)
org.jinterop.dcom.common.JIException: The RPC server is unavailable.Please check if COM server is up and running and that route to the COM Server is accessible (A simple "Ping" to the Server machine would do). Also pease confirm if the Windows Firewall is note blocking DCOM access [0x800706BA]

I have checked that the Windows XP Firewall is Off. I also do all the configuration described in the file OPC Configuration ScadaBR (find on this forum) : Access Permissions for all users in the COM Security tab (DCOMCnfg) for the Edit Limits and also for the Launch and Activation Permissions

Does anyone have an idea where the problem is ?

dsialbi

@dsialbi

Latest posts made by dsialbi