Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.
Dallas Maxim DS2438
-
Hi
I bought a MS - TC Temperature and current sensor from Homechip.com, Link = http://www.homechip.com/catalog/product_info.php?cPath=27&products_id=73.
This is based on a DS2438 chip which Mango recognises fine but its reading voltage not amps or even watts which is what i need to make use of the data.
The blurb on the site says that the output the MS-TC will measure AC current in the range of 0 to 20 amps. While not calibrated, empirical data indicates a typical accuracy of ±3% of reading. The response curve, established at 23 degrees C, is linear from 0.2 VDC (1 amp.) to 3.78 VDC (20 amps.). The zero current reading is 0.09 VDC.
Is this something you can add to the setup ?
Cheers
Keith
-
Unfortunately we do not have a DS2438 in the lab with which to test. Also, i'm not sure what the blurb from the site indicates. Do you want the Mango convert the 0.09 to 3.78 VDC to 0 to 20 amps? This could be done quite easily with a Meta point (but that's only available in the commercial version).
-
Looks like I will have to buy the commercial version
Thanks
Keith