Using HTTP JSON receiver with application/json

[Pierre-Philippe Barzin]

Hello all,

I'm Pierre-Philippe. I've just begin with mango. I would like to connect an arduino using a server socket

My arduino send information on http://192.168.1.44:4200 (in my LAN)

I receive this information in the browser :

and in raw data

about headers :

In the data sources i put this information :
Data source
Name : Test
Roles that can edit : user
Remote IP white list : 192.168.1.44:4200
Set point URL : http://192.168.1.44:4200
Receive type : Parameter

In the data point configuration :

Data type : Alphanumeric
http parameter name : /:"analog_0"
Device identifier key : analog_0
Device identifier : analog_0

When i go to the resume of data point, I see as device name analog_0 and in name analog_0 but "No value" in the point value.

I can imagine that my question is more or less a "newbee" question. But I think I need some helps to begin

Somebody can help me to configure this "basic" behavior ?

Thanks a lot,

PP

Note : Sorry for my english, it's not my native language

[MattFox]

From the help information:

Data is received at the path httpds. So, if your system is accessible at, for example, 'http://localhost/', data should be directed to 'http://localhost/httpds'.

So in your case you want 192.168.1.44:4200/httpds to send data in.
Click on listen to check and ensure data is coming in:

This should help you get started

Fox