Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.
Error exporting new datasource
-
Are your data sources completed/tested? You did mbus and openv?
-
No consider both as highly experimental...
Currently I work on openv read maybe write access.
If this is done I have to update the m-bus sources at mbus4j.sf.net to the latest specification (IEC).
Once this is done I plan to support primary adressing with no change of the data frame.
Later support for- secondary addressing.
- rewrite JSP to make it more compact
- ability of changing frames.
- atmodem support (atmodem4j.sf.net).
My problem is currently that I have no direct access to m-bus hardware so this is mostly tested against dummys or mbus data from different readouts.
If anyone has access to hardware it will speedup development.
Arne
-
If anyone has access to hardware it will speedup development.
Isn't that always the problem! I might as well make a shout out now for OPC XML-DA hardware. If anyone has any that they can make internet accessible for the purposes of data source testing, please let me know. I know there are some sample servers on the internet, but those i've found so far contain a single unchanging point. Not very useful...
-
Maybe try using WinCC from SIEMENS that has XML-OPC capabilities - I never tested it...
I think you can grap a demo version vom your local dealer.
Or could you send me the code for initial testing?
Arne
-
I haven't written any code yet. There was no point in starting without decent equipment to work against. You have some OPC XML-DA stuff? Any chance i could hit it up for a bit? Could you open just to a particular IP address?
-
What about OPC UA (xml and binary protocol) I dont know the licence restrictions for any?
And for software see www.opcfoundation.org, there seem many servers and clients for demo available???
Arne
-
And for software see www.opcfoundation.org, there seem many servers and clients for demo available???
That would be what i was referring to:
I know there are some sample servers on the internet, but those i've found so far contain a single unchanging point. Not very useful...
-
What exact is your plan OPS server, client or both.
I looked at the Java6 implementation of the Web service or axis2 or....
if mango should act as a server we need a client first - I can test it against WinCC.
after that the server should be easily implemented.Arne
-
Mango is primarily intended to act as a server.
-
So maybe implement at first the client into mango ;-) (one can use the get function to retrieve data from other (OPC-servers - which in turn could be simple devices...)
to have a testet client - and then do the server stuff.what do you plan to use JAX-WS or Axis2?
Arne
-
I use axis because i know it better, and it has ANT support (which i couldn't find in less than 5 minutes for JAX). But if someone else is doing the work it doesn't matter to me.