Please Note This forum exists for community support for the Mango product family and the Radix IoT Platform. Although Radix IoT employees participate in this forum from time to time, there is no guarantee of a response to anything posted here, nor can Radix IoT, LLC guarantee the accuracy of any information expressed or conveyed. Specific project questions from customers with active support contracts are asked to send requests to support@radixiot.com.

Radix IoT Website Mango 3 Documentation Website Mango 4 Documentation Website

Water Scheme Telemetry System


  • The Water Scheme I've been working on is almost complete...
    Attached is the latest layout, I changed from a logical block layout to a phyisical map overlay from the farmer's mapping software, so now they can clearly see where everything is and the whole system is alot easier to operate.

    I've done all the automation in using the script system now that I know how to work it ;-P Thanks to Joel etc for helping me through that stage of it.

    The tanks can be switched to AUTO or MANUAL. In AUTO mode they start to fill if the water level is below the Low Level and I've recently added a schedule for Peak and Off Peak power metering so that they can take advantage of Off Peak rates which are currently a third of On Peak rates!!

    You can see everything on one page and if a pumps running or which way the solenoids are switched.

    What a great product Mango is, extremely easy to use for the end user once you've setup the background stuff.

    Attachment: download link


  • Looks great Dan!

    May I ask what you are using to (wirelessly, I assume) transmit your data?


  • Gidday, sure. I'm using a 5GHz Ubiquiti system. This gear is rock solid, I've been using it for years to link stuff together.

    Ubiquiti Rocket M5 with omni antenna at the Top Tank site, then all the other sites can see the Top Tank hill site including the farmhouse where the equipment running Mango is, all use Ubiquiti M5 Nanobeams.

    A couple of the sites are running solar so I'm using www.air802.com injectors to provide PoE from a 12VDC supply, these are excellent and very cost effective. And DIN mount as with the Moxas etc.

    Cheers
    Dan


  • A couple of photos of the sites...

    Attachment: download link


  • Driveway Tank Site - now has an HD Infrared Ubiquiti Camera on the driveway running over the same network ;-)

    Attachment: download link


  • Solar Pump Site

    Attachment: download link


  • Hi Dan

    Cool, we tend to use Mikrotik gear (just because we have a good support relationship with the supplier) and I have done a few little PtP links on cattle stations etc.

    It's a shame you aren't in Perth, we could definitely find some mutual ground and opportunities! We have a big solar powered bore pumping project going on at the moment with some hairy comms challenges. Amongst other things..

    Cheers


  • I'm in Gladstone, QLD - happy to travel..


  • Hi Dan,

    I'll send you a private message,

    Cheers
    Jeremy