Stories

Seeking feedback: Temp mail API and Boomlify

boomlify — Sat, 23 Aug 2025 08:08:40 GMT

Hey everyone,

admin/moderator please approve

I’ve been working on something for almost 2 years now, and finally, I’m ready to share it with you all. I built Boomlify, a modern temp mail service with some unique features that I haven’t seen offered together elsewhere. I’d really appreciate if you guys could take a look and give me some feedback.

What makes Boomlify different?

Long-lasting emails → Unlike typical temp mails that vanish in 10 minutes, every mail you generate on the web app lasts 2 months by default. If it expires, you can still regenerate the same username-based temp mail again.

Multiple domains → Users can pick from multiple domains, not just one generic one.

Smart inbox preview → Clean inbox display for easier use.

Cross-device access → Your temporary emails work anywhere.

Privacy-first → No registration required for guests, but if you register, you get more flexibility.

Custom domains → Both API users and UI/web users can leverage custom domains.

Developer-friendly side:

Boomlify isn’t just for quick disposable emails — it also provides a powerful temp mail api for developers.

Pricing is simple:

$1 = 1,000 credits

1 credit = 1 mail creation

Flexible timeframes available: from 10 minutes up to permanent emails.

Free credits: Every API user gets 50 credits daily for free to test and build.

Dashboard controls:

API users can even manage their generated emails directly from the same dashboard — just toggle the “API” mode button.

Web app (non-API users):

Completely free to use.

Emails last 2 months.

Ability to regenerate the same username after expiry.

So in short, everything is free for web users, and for developers who want to integrate, the API is affordable, powerful, and flexible.

I’d love to hear your thoughts. Do you see yourself using Boomlify either as a regular user or integrating it in your workflows/projects? Any feedback, suggestions, or criticism is welcome.

Water Scheme Telemetry System - 2016

mihairosu — Mon, 22 Feb 2016 21:17:04 GMT

That's a lot of work to connect all that. I bet you've got a happy farmer on your hands. Thanks again Dan, Mihai

Overview at a high rise

JoelHaggar — Thu, 24 Dec 2015 17:35:48 GMT

Thanks for sharing this is great to see!

Weather Stations using MangoES

LilControler — Sat, 08 Aug 2015 07:34:35 GMT

This is really nice. Wow! what a great job you guys did...

possibility of mango cluster

jeremyh — Thu, 06 Aug 2015 14:40:58 GMT

Clustering Mango for HA (high availability) and failover would be a great feature and very attractive to enterprise customers I think. Personally, the greater value would be in having redundancy, rather than sharing load (as it seems Mango can scale very well itself anyway). Some network monitoring systems (PRTG?) implement this in a way that means that one node/instance is doing the monitoring, and syncing data to a secondary instance, but if the primary goes down the secondary instantly detects this and takes over polling. When the primary comes back the data is resynced.

Washington State Legal Pot Farm installation

datacontrol — Sat, 09 May 2015 19:19:56 GMT

HI there is a tool MatrikonOPC has that called the Tunneler it eliminates the need to uses DCOM completely and allows you to forget about windows security profile configuration completely. Check out this link for additional info on tunneller [link text](link https://www.matrikonopc.com/products/opc-data-management/opc-tunneller.aspx) Good luck..

Writing a case study

JoelHaggar — Thu, 26 Feb 2015 20:57:18 GMT

@jeremyh This attachment has some question we have put together. We will be making some special offers in exchange for detailed case studies so if anyone is interested please let us know. Case Study Questions, Mango.pdf

Coal Processing Plant

JoelHaggar — Mon, 15 Sep 2014 11:21:24 GMT

Thanks Duncan!

Water Scheme Telemetry System

jeremyh — Thu, 26 Jun 2014 13:23:47 GMT

Hi Dan, I'll send you a private message, Cheers Jeremy

Mango + Raspberry Pi + DS18B20

nikorun — Thu, 13 Jun 2013 22:11:02 GMT

Hello, In fact I have frequent errors with the Modbus and I guess this could be caused by a lack of power on the Alix board. I've googlelized those day to know wich CPU is faster beetween GFeode (On Alix) and ARmv7 but nothing has conviced me enough to switch to Pi. But you're right, I will try and let everybody know which one suits best to Mango, by the way I'm running Mango for one year now and this is time to change :lol: Another solution should be to swicth directly to BBB (http://beagleboard.org/Products/BeagleBone Black) , for 10 more bucks there are some intersting improvement vs Pi, starting by ... more power !

Graphics

stevededrick — Tue, 02 Apr 2013 13:41:46 GMT

Also check out our DGLux tutorial videos in the getting started section of this forum Cheers,

Mango + IMO PLCs + Arduino for Home Automation

nikorun — Mon, 25 Mar 2013 14:03:20 GMT

Hi, Having recently bought an old house, I Had to entirely rebuild the electrical circuitry. So I decided to include some automation. As the goal was to manage every Lamp and every switch in the house, the most important think was to build something stable, So I decided to use Industrial PLC based on hte Brand IMO (http://www.imopc.com), mainly for a reason of global cost. It's based on 5 IMO ISMART (http://www.imopc.com/pages/spotlight_ismart) PLC's wich collect the switchs and pilots the lamp with they internal relays. Each ISMART manage a group of 16I/O and the 5 ISMART are linked by a MODBUS and drived by a Master (IMO i3 : http://www.imopc.com/pages/spotlight_i3Microsite) that handle any intelligent action. In case of any problem with Modbus or with the master , any slave is still autonomous to drive the SWITCH ON / SWITCH OFF actions . Be sure that this point is *very *important to keep the ambience cool enough en in the house ... 8) To add some more functionalities, I've add a 6th slave to this bus by using an Arduino, it was a bit tricky with hte modbus library but finaly works pretty well, as lon as you keep the speed of the bus low enough, arduino is not a Ferrari I guess.... This systems works well for 3 years now but I've decided to improve it by adding Internet connectivity, this is where Mango takes place ! For that, I use a second Modbus in my i3, so that Mango polls the i3 and can then read/write to it's registers and therefore acts on all the ISMART of the house. I can also push some weather datas to Pachube. I had many problems to do that, mainly because of the instability of the Modbus beetween the i3 and the Mango (installed on a ALIX board by the way). It works now but is a little bit instable for a reason I ignore (CRC problems / Excepetions errors ...). So that's it. I would be glad to share this with other people that did similar experiences (Sure this Forum is plenty of !) and if possible avoid the traps i ran into. But first of all I would like to thanks all the persons that works on the Mango project, It's very human affordable and powerfull enough to add some nice functionalities to a home automation project !! Nicolas (mango [at] airtune [dot] info ) Bye

Mango + arduino uno + wifi shield and http retriever

timsnider — Sun, 16 Dec 2012 15:25:19 GMT

Mike...sorry, my application is windows 7 pc running mango which communicates over home wifi network with arduino+wifi shield.

Large Microbrewery in Colorado operational on this system for over a year now

tped — Fri, 11 May 2012 00:13:26 GMT

I am also working with a micro brewery. Similar in size to the one you described. We use a PLC and a couple touch screens to control temperatures and monitor the process. Just attached a Mango server to the process and want to use the Brewers Dashboard to give them more convenient access to the data as well as utilize the notification features, etc. Just started looking into the product. My initial plan is to use MANGO to monitor the temps, valves, etc and report/notify. Were is the best place to get more information on setting up the dashboard ie getting the tanks & valves listed, etc. thx

Overspeeding Androids

VeroMcLean — Sat, 23 Jul 2011 02:37:22 GMT

I have purchased Andriod phone(Samsung Galaxy Pop). Now I am trying to edit excel sheet but I not getting any option to edit. How can I solve this problem. Please Give me any solution.

Building/HVAC Automation

dkudos — Wed, 29 Jun 2011 00:11:53 GMT

Hey All, I needed a solution for large 2 pipe steam boiler system zoned by room. It is controlled by a Wago 750-841 modbus ip unit. Firing RIB relays to turn on the boiler and put the T-Stats into day or night mode. My Scheduling is done with google calendars. I wrote a java app the connect via google's API. Need to integrate with mango let me know if it is possible. Also control a Mitsubishi City Line system via BACnet at the same time. Awesome! Would have not been possible without this app. I will post pics and other cool stuff once I am done. Dominic

Mango integrated into a large-scale Battery Management System

irumley — Sat, 14 May 2011 22:11:55 GMT

I will be test/using Mango as the UI in a large-scale BMS. The size of an average installation is around 1 MWh. There are approximately 160 modules (batteries) of 6.2kWh organized into 10 packs of 16 modules. Each module has approximately 200 data points which are a mix of analog and digital data (eg. voltages and alarms). The architecture is structured such that the data is gathered by CAN from the 10 "pack controllers" using a .NET-based driver and sorted and inserted into a MySQL database (it is "thin" in that no archiving takes place here). Mango accesses the MySQL database for its data source. I have converted Mango to use MySQL rather than Derby as its own database. I hope that this setup will enable me to update 10% of the data points at once per second. Some data, such as temperatures, don't change fast enough to warrant better than an update every 5 or 10 seconds. I have a simple framework with all the components set up and running now. I have been really impressed with Mango so far., and I will be developing some custom graphics

Posting on Twitter from Mango

fclauson — Thu, 30 Sep 2010 13:21:39 GMT

I could be really sad and set up my mango system to watch for the tweet and then react accordingly :mrgreen:

Application screenshots

EAlan — Thu, 22 Jul 2010 17:47:53 GMT

It seems these files have been lost in the Server upgrade. ;(....If any of you could re-post your screen shots that would be great. I'm trying to get some sample images for a presentation. I've put some things together myself, but as always, I have not been given a lot of time to experiment. Ed.

Datalogging and Live display

peadar — Mon, 01 Mar 2010 22:30:30 GMT

thats right. Using the http publisher feature. Just made sure all the parameter names match and it all works seamlessly...

TED - The Energy Detective data to Mango

mjbcomputers — Wed, 02 Dec 2009 14:58:25 GMT

Hi, I just purchased the TED 5000 series... Will let you know how it works with mango shortly.